Autovei Mercedes ECU Programming Device

Autovei Mercedes ECU Programming Device

Autovei - Truck Explorer is a ECU programming device used for special operations on Mercedes - Benz , MAZ , MAN , SCANIA , VOLVO , CLASS trucks, tractors and buses. You do not need internet while operating with Autovei-Truck Explorer ECU programming device. It provides all operations without the need for internet.

It is a unique product on the market for special operations on Mercedes - Benz, MAZ, MAN, SCANIA, VOLVO, CLASS trucks, tractors and buses. This product allows unlimited use for MR (PLD) control unit write read FLASH and EEPROM, programming, coding keys and calculating VeDoc (X1, X2, ...), FDOK (XT, XN) access codes. All operations are performed from the OBD and do not require any Internet connection. MB Truck Explorer (Autovei)

The FIRST device in the WORLD that can read and write MR memory - MR (PLD) control unit / FLASH / EEPROM via OBD is VEI hardware.

It is possible to connect to the control unit with AutoVEI as follows:

- OBD (directly from OBD to MR module) or

- Direct connection via Direct Connect cable (on the MR desk).

This function is especially useful for chip tuning jobs and is very successful in recovering a crashed unit after ECU update. All operations are done via OBD and Direct Connect cable and there is no need to open the ECU. Since the ECU is not opened, no warranty is invalidated. MR software clones the device before the operation and uses all the backup features before the operation and archives the MR software to the computer as a *.bin file in case of a possible system crash and allows you to use it in different vehicles later. It generates key codes for trucks and tractors and allows you to encode new keys for vehicles.

In this way, it is possible to make the new key while connected to the control unit:

- OBD (MR is mounted inside the truck) or

- Direct connection via Direct Connect Cable cable (on MR desk).

VeDoc and FDOK calculators (X1, X2, etc.)

Calculates access codes for VeDoc! FDOK ( XT/XN ) algorithms. XENTRY (DAS) software and synthesis codes should be used with the compatible diagnostic tool if desired. All operations are performed offline by connecting to the required tool for VEDOC. No tool connection is required for FDOK calculations.

DAS password generator

calculates the password (euro 3, euro 4 MR downgrade, euro 5, etc.) asked by the DAS to access some special functions.

With this function it is possible to read DTC, error description and DTC clearing.

Supported trucks, tractors and buses :

Mercedes - Benz, MAZ, MAN, SCANIA, VOLVO, CLASS

All supported trucks and buses

Supports the following PLD (ECU) licenses and protocols:

1 Temic Euro 2 PLD 1 : ( MCU C167CR , AM29F200AB FLASH , EEPROM NM93C56 1 )

2 Temic Euro 2 PLD 2 : ( MCU C167CR , AM29F200BB FLASH , EEPROM NM93C66 1 )

3 Temic Euro 3 PLD 1 : ( MCU C167CR , AM29F200BB FLASH , EEPROM NM93C86 1 )

4 Temic Euro 3 PLD2 : ( MCU C167CR , AM29F400BB FLASH , EEPROM NM93C86 1 )

5 Temic Euro 4 5 PLD : ( MCU C167CR , AM29F400BB FLASH , EEPROM NM93C86 2 )

6 Continental Euro 4 5 PLD : ( MCU C167CR , AM29F400BB FLASH , EEPROM NM93C86 2 )

For licenses of 2011 supported models additional license "2011+" is required:

7 Continental Euro5 PLD : ( MCU XC2287 ( 768KB flash ) , 1 EEPROM M95640 ) .

8 Continental Euro5 PLD : ( MCU XC2287 ( 768KB flash ) , 1 EEPROM M95640 ) .

Additional license required " 3Core " :

9 Continental Euro 5 MCM ( MCU TC1796 - 256F / TriCore 1 EEPROM M95128 ) .

10 Continental Euro 5 MCM (MCU TC1796 - 256F / TriCore 1 EEPROM M95640) .

MB Truck Explorer includes 12 months Update and Support Service.

COMPATIBLE VEHICLES

Mercedes - Benz , MAZ , MAN , SCANIA , VOLVO , CLASS trucks, tractors and buses