Meta Diag

KONFORT 780R BI-GAS

"
THE BEST OF THE COMFORT SERIES

KONFORT 780R is the best model in its class, unrivaled by any other air conditioner on the market.

Although it does not differ in size from other stations in the Konfort range, the 780R has 2 separate tanks and 2 lines for service and cleaning. Therefore 2 gas filling processes (old R134a and new R1234yf) can run simultaneously.

The 780R is the perfect solution for repair shops servicing both new vehicles using the new R1234yf gas and older vehicles using the traditional R134a gas

SAFETY AND CERTAINTY FOR THE OPERATOR

KONFORT 780R is the best model in its class, unrivaled by any other air conditioner on the market.

Although it does not differ in size from other stations in the Konfort range, the 780R has 2 separate tanks and 2 lines for service and cleaning. Therefore 2 gas filling processes (old R134a and new R1234yf) can run simultaneously.

The 780R is the perfect solution for repair shops servicing both new vehicles using the new R1234yf gas and old vehicles using the traditional R134a gasr

SPECIAL SERIES SOLUTIONS

Since standard skewers are not sealed in an airtight container, they contain some air. The water molecules in the air stick to the oil and spoil its purity. As a solution to this, TEXA has produced special sealed containers to prevent contamination by air and moisture. These containers can be reused thanks to a special system that draws air out of them and cleans them.

HYDRAULIC SYSTEM CLEANING

To guarantee safety and efficiency, oil and refrigerant gas types must not mix and contaminate each other. TEXA has developed a special system that automatically cleans all internal lines in the 780R system, so that mixing of gases and oils is impossible.

AUTOMATIC VESSEL IDENTIFICATION

With the introduction of new vehicles (especially electric and hybrid vehicles), new oils have started to be used. It is very important to use the correct oil type (PAG or POE) when filling the air conditioner. Incorrectly injected oil always has the potential to damage the air conditioning system, so the operator must avoid such mistakes. TEXA's automatic container identification system compares the data of the installed oil container and the oil in the selected vehicle and warns the operator if the wrong oil is being used.

TILT SENSOR TO MEASURE FALSE READINGS

In air conditioning gas measurement, measurements made on uneven floors may be inaccurate. Thanks to TEXA's patented tilt sensor system, it measures the horizontal angle and warns the operator on uneven floors and prevents incorrect measurement.

FAN PROTECTION SYSTEM

The new refrigerant R1234yf is classified as "highly flammable" and this must be known to the operator. KONFORT 700 series air conditioning charging stations feature a highly efficient fan system to eliminate the possible accumulation of air conditioning gas inside the unit.

AUTOMATIC LEAK DETECTION SYSTEM

KONFORT 700 series units automatically perform a double leak detection check. All safety-related operations are performed automatically to eliminate errors.

NANO SERVICE FOR AIR CONDITIONERS

The complexity of modern vehicles also extends to air conditioning systems. For this reason, garages need an automatic diagnostic system integrated in their charging stations to solve various problems related to air conditioning systems and ensure maximum customer satisfaction in the process.

Thanks to TEXA's twenty years of experience, KONFORT charging stations can now run automatic diagnostics on vehicle air conditioning systems, find faults, read parameters and change settings. This remarkable achievement is the result of the Bluetooth connection between the NanoService diagnostic device and the KONFORT air conditioning charging device.

This integrated solution* uses the KONFORT charging station's display to switch from traditional charging to a complete, simple and fast automatic diagnosis of the air conditioning system. In this way, your garage can offer its customers a truly exceptional service.

*Optional

OPERATING SYSTEM

TTEXA operating software meets the most exacting accuracy and precision requirements.

Any possible error or message is displayed with detailed error messages. The TEXA software manages the filling and emptying operations itself to guarantee accuracy.

All models are equipped with a removable SD card that allows communication with a Windows PC to update the vehicle make and model database, check and confirm all services and potential software updates.

TECHNICAL SPECIFICATIONS

Main features

2 air conditioning gas management R134a and R1234yf

High-visibility TFT display

Visual interface

Database/service management via SD Card

2 x 12kg tank

Filling accuracy +/- 15gr

Highly efficient gas discharge (over 95%)

Two-stage vacuum pump

Hermetically sealed oil containers

Automatic container identification

Automatic gas sensitivity measurement

Measure lock system

Automatic service management thanks to multi-language support

Automatic service messages

Simplified use

Thermal printer

 

Optional:

VDC kit, NanoService, Vehicle cleaning system, gas identifier, air conditioning efficiency meter